 |
 |
 |
|
| A two dual-channel crossover incorporating Peavey's legendary low-noise, low-distortion design. The ruggedly contructed PV 23XO gives you the flexibility to manage a two-way stereo system or run in a three-way mono configuration. The PV 23XO has variable-state filter controls with 24dB per octave filters and utilizes XLR inputs and outputs for balanced operation from 20Hz to 20kHz. |
|
|
|
|
|
 |
|
 |
|
Features
- 2-way stereo or 3-way mono
- Dedicated 100Hz subwoofer output
- Mute switches
- 24 dB filters and mute switches
- Fully adjustable crossover frequencies and levels
- XLR input and output connectors
- Internal power supply
- Channel Gain Control: 0 to +12 dB
- Low Frequency Level Control: -? to +6 dB
- High Frequency Level Control: -? to +6 dB
- Low Frequency to High Frequency crossover: 100 Hz to 1 Khz x10 range: Changes Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz) 2-way stereo/3-way mono changes the unit from 2-way stereo or 3-way mono
- Each output is -3 dB at the selected crossover frequency value. Outputs are essentially flat within their relative passbands
- Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz
- Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB; 22 Hz to 22 kHz, unweighted gain @ 0dB(ref +4dBu) - 90dB
- Low Frequency Output: -86 dBu below 80 dB
- High Frequency Output: -84 dBu below -78 dB
- Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0 dB) +22 dBu
- Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced
- Input Impedance: 10 k ohms unbalanced
- Inputs: XLR Balanced
- Outputs: XLR Balanced
- Power Requirements: 120V AC, 50/60 Hz, 20 watts (domestic model)
- 19"W x 1.75"H x 5.5"D (Unpacked)
- 20.25"W x 4"H x 7.25"D (Packed)
- 5.5 lbs. (Packed)
- 4 lbs. (Unpacked)
|
|
|
 |
|
 |
|
